Ghost 2 Immobiliser Reviews
The Ghost 2 immobiliser utilizes cutting-edge technology to prevent car theft. This hidden device is not noticed by thieves, and it only starts the engine when a pin or app is entered.
It connects to the CAN data network of your vehicle and is weatherproof. It also comes with the service/valet mode that allows you to temporarily start your car while it's in garage for cleaning or servicing.
Easy to install
The Ghost immobiliser shields your car from key theft, cloning and hacking. It utilizes a unique PIN code system integrated with the car's ECU that makes it impossible for thieves to identify or alter. Unlike traditional immobilisers, it does not require any special keys or sensors, and is completely hidden without any LED indicators or signals that signal its presence. It's also less expensive than replacing an ECU or installing the new key fob. Additionally, it could lower your monthly insurance premiums.
When installing a Ghost 2 immobiliser, be sure to follow the instructions of the manufacturer carefully. This will ensure that the device functions properly and efficiently. Test the system after installation by entering the PIN number and then starting the car. Regular testing will enable you to spot any issues early on.
Check the location of the CAN H and L wires prior to starting the installation. They are essential to power the immobiliser, so it is vital that they are connected properly. It is also an excellent idea to label the wires to make it easier to identify them during the installation process. Once you have located the wires, connect them both to a 12V power supply and the grounding source. Use a fuse tap to protect the connections from damage or short-circuits.
After connecting the wires, tidy up the wiring with cable ties to stop alteration. You can also cover the connections with insulation tape or heat-shrink tubing. This will shield the device from electrical shorts, and extend its lifespan. Once the wiring is secured, it's a good idea to test the Ghost 2 immobiliser.
In the event that you have to surrender your vehicle, such as for servicing or valet parking for valet parking, the Ghost 2 immobiliser has a service mode that temporarily disables the PIN code sequence. To activate this feature, press the brake pedal while holding the accelerator, and press a number of times equal to the first digit of the emergency code. The system will enter service mode. This is confirmed by flashing 5 times the indicator signal.
Change PIN codes easily
It is simple to secure your vehicle from theft with the ghost 2 immobiliser. It is discreetly installed within the vehicle and is able to be accessed by a unique code. The device connects directly to the vehicle ECU through its data bus. It does not rely on radio frequency signals, as do traditional Thatcham immobilisers or aftermarket alarm systems. This makes it difficult for thieves to detect the click of a conventional immobiliser relay or to install new key fobs. The control unit is concealed in the vehicle's wiring or dashboard, and isn't physically tampered to reset the system.
The ghost 2 immobiliser connects to your vehicles CAN Data network and makes use of existing buttons on the steering wheel, door panels and the centre console to create a customisable sequence of up to 20 button presses which must be entered before the engine can begin similar to the PIN code. This next-generation system does not require any cutting of wires when it is installed and can be fully reprogrammed at any time. You can also put your vehicle in Service or Valet mode to allow it to start for a short time when you give it to a mechanic for work.
You can also make use of the app to change your PIN number or disable it completely if lost your keys. This feature is especially useful in the event that you've lent your car to someone else to use for parking or valet service. It prevents them from starting the car and driving it off without your consent. It is also inaccessible to professional thieves since it doesn't make use of any radio frequencies or circuits.
The ability of the immobiliser to stop relay thefts is a great feature. Relay theft is a common method of car theft in which thieves hack into the diagnostic port on your car and alter the original signal that is sent by the key to the vehicle's ECU in order to trick it into thinking that a valid key is present. This is how traditional immobilisers can be bypassed, however, with a ghost 2 immobiliser, the signal is blocked before it can reach the ECU.
what is ghost immobiliser to use app
Ghost 2 is a revolutionary immobiliser that safeguards your car from key-cloning, hacking and key theft. It connects to the CAN data network of your vehicle and requires a PIN code in order to start the engine. It also prevents thieves from using signal spoofing or device spoofing, which are common tactics employed to steal vehicles.
The system is simple to use and works like an ordinary auto alarm. Installing the system allows you to create a unique 20-digit pin code that needs to be entered before starting the vehicle. This will stop your vehicle from being stolen even when you lose your keys. You can turn off the system with an app for your phone.
The ghost is quiet and does not emit radio frequency signals. It is a weatherproof, discrete device that can be installed in any vehicle. It can be concealed beneath the dash, steering wheel, or door panels. It communicates with your ECU via the CAN data circuit and is not affected by diagnostic tools that some thieves employ to locate security systems. It is not affected by jamming devices that disguise codes.
It is a covert installation that doesn't require any cutting of wires or modifications to the vehicle it can be used as an anti-theft system for any vehicle. Its technology is proven to be effective and in compliance with TASSA standards. The Ghost is a fantastic choice for classic, sports, and prestige cars. It can also be used as method to safeguard vehicles hired on websites like Turo.
The Autowatch Ghost 2 is the next generation of vehicle immobilisers. The system is unnoticeable to thieves and stops them from starting your vehicle unless they have your PIN or have been authorized by the app. It also does not emit any radio frequencies or other signals that could be detected by scanners. Installation is simple and quick. The app is simple to navigate and offers a user-friendly interface which makes it easy to install and use. It also comes with an GPS tracker that can help police find the vehicle and locate it.
Simple to reset
It is possible to safeguard your vehicle from theft using an immobiliser ghost 2. It is integrated into your vehicle's ECU, creating a barrier that thieves are unable to break through without the proper pin. The device is also TASSA-certified which means it is acknowledged by insurance companies. It is a powerful tool to prevent car theft and will save you money in the long run.
In contrast to traditional alarms and immobilisers that require circuit cutting for circuit cutting, the Ghost system is directly connected to the vehicle's CAN network and operates using your existing buttons on the dashboard and the steering wheel. You can create a unique pin that can be up to 20 presses in length. This PIN is required to be entered before the engine can be started like the credit card PIN. The Ghost system is invisible to thieves and has no lights to indicate its presence. This makes it the most reliable aftermarket CAN-bus immobiliser on the market today.
Another advantage of the Ghost system is that it doesn't make use of radio frequency signals, meaning it cannot be scanned or intercepted by thieves. This prevents relay attacks and keys that are cloned as well as the more popular method of hacking a vehicle's CAN bus system by scanning for signals from its alarm/immobiliser. Additionally to that, the Ghost system is designed to be completely hidden within the vehicle, and there are no lights or signals to indicate its presence.
The system also has the option of a Transport Mode that disables the Ghost system that is helpful in situations where you need to temporarily deactivate it, such as when you are traveling or performing maintenance. This mode is less effective than Service Mode as it doesn't disable the Ghost system if you exceed 31 mph within 15 minutes.
You'll need the emergency code from your installer to reset your Ghost 2 immobiliser. The code is usually hidden beneath the scratch-off portion of the card provided with the installation. This emergency code should be secured and kept in a safe place, such as your wallet at home.